TOPIC: AFTERCARE

This post is to help give some direction about aftercare methods and ideas. Feel free to add on.

I will start with what I have done that worked the best. I will not be making a long story about what i have done that did not work unless it comes up in in subsequent posts or questions.
To begin, you MUST HAVE a few devices that will attach to the head of your penis ONLY or just behind the glans without touching the shaft. Do not touch your shaft with any type of sleeve or compression device unless you want to displace your filler and fuck it up. The reason you are going to want a few different devices is so that you can switch between the different ones based what you are wearing and where you are as well as due to the irritation that happens to glans from all the attention you are giving it. Switching between devices gives the head and/or area behind the Rim of your glans a small break from one particular type of irritation.
Remember - you need to be as careful as you can be for 3 days, and then you can slack up a bit. Be diligent and proactive here guys, it makes all the difference.

OK. Once your filler is completed and you ready to leave the Dr office. Strap up right then and there, or wait until you get to the nearest bathroom and then do it. Keep your penis stretched out and pulled downwards as much as possible, no matter what. When you are sitting keep; your leg that it is attached/strapped to extended outward (if you are wearing an ankle strap) and keep your knees spread wide apart, for tension if you are wearing a knee strap. I prefer the ankle straps as I find them to be more versatile as well as incognito. Also, when you are lounging you can keep the penis better stretched and more straight with an ankle strap or move the ankle strap onto your foot.
I avoided backward angles. Such as: Sitting in taxi leaned back, I would lean forward with a straight back and/or sit sideways with my leg extend out and down. If i was lounging in bed, I used extra blankets and folded them and sat on them to create a slight angle ( FYI: this is a good idea for hotel stays - ask for extra pillows and blankets. My leg was always straight and stretched.
If you are not staying at hotel near your DR and you head straight to an airport after a procedure, which I have done, Stand UP - ALOT. When you are seated, get an aisle seat and stick your leg out; or go the other way if no one is sitting next to you.
NOTE: the more you stay seated the more the filler gets bunched up and distorted and will look bad; which also opens the potential possibility of losing some filler into the body cavity.
I seriously recommend taking a few days off work to do all this properly. If you cant take a few days off of work after getting a procedure then your aftercare WILL be harder to complete perfectly in my opinion. If you must work, try to stand when at working; stand at your desk. etc. Again, the best option is to take a few days off.
Next, where ever you are staying for your aftercare, whether it be a hotel or back at home; Make sure to have a microwave nearby. So if you are at home and you are hiding from your kids, better get a microwave in your bathroom. I promise this will help: explanation coming.

For all of my procedures I have used Dr Carney at @Rejuvall . So I will be referencing something they do as I move on with how I did my aftercare.

Aside from keeping the penis completely stretched downward at all time, I found that heating and massage/rolling frequently worked best for my and fluid build up. I found that heating wet rags in the microwave, 2 or 3 at a time, and one wrapping one around my penis to heat the penis and the filler inside ( all while keeping the other rags on deck and hot ) worked the best for me in manipulating the filler into a form and shape that I was happy with. I did this every 3 hours, roughly, because I wanted to make damn sure my outcome was acceptable. Now, could you do it less, probably, but I wasn't willing to take any chances. I only have one dick.
I also chose not to sleep very much for these 3 days. That was a choice I made to make sure my aftercare was top notch. I believe I was able to get about 4 or 5 hours at most before doing a rolling session. During the day, if i was tired, take an hour nap. Again, I had the days off. When i was sleeping though, I slept ONLY in the prone position. I used 3 donut pillow around my pelvis and other pillows placed at my comfort to position my body.
During this phase I also took 5mg of cialis each day to keep blood flow moving and I wanted to and chose to get erections somewhat frequently.

Here is a list of some of the items that I have personally used and still use from time to time based on my needs.
The first is a simple Noose style hanger that can be obtained from almost anywhere or even made by hand (DIY). The one I happen to have bought was from Zen.
zenhanger.com/products/cotton-hanging-no...nging-and-stretching
The second item is actually an ED ring, I bought a few of these due to being unsure how tight they grip and how easy it would be to pull them off. I used them right behind the glans in the same fashion the Still On System is used. For this item to work I used two tiny S clips form home depot and some small bungee cord purchased online. Tie it all together to your liking. This item can also be used with the Still On System strap and bungee with some creativity.
www.gesiva.com/product/ed-tension-rings/
Third is the Still On System, referenced above: www.stillonsystems.com/
Fourth and 5th were an original ESL40 and also a knockoff from China: I can not find these anywhere anymore.

Im not sure at the moment what I have left, if anything. I hope this helps.

Great info Texas!!!! I just had the Bellafill last night. It looked amazing when he was done. It’s all bandaged up now - I’ll take picks later - trying to keep it from getting bunched up. The parts I can see are look like they got smacked with a bat. Dr Carney said it would be black and blue when bandage come off.

The bandages stay on 48 hours - so I can’t soak until tomorrow night - then it is game time with the Texas Plan!!!! Just trying to keep it from getting Bunched up for now!!!

@Pauly You could roll and shape with the bandages on, or take them off and put them back on. but again, thats up to your comfort level based on what the Dr told you. I also do not know the set up time of Bellafill.

I used to roll mine. Think like your rolling a stick trying to start a fire. BUT, i did from the bottom to the top and not really back down. The goal was try and not push anything out.

I just want it to look like it last night!! I’m trying to stretch it and pull a little. They are cloth and tape bandages.

Texas wrote: @Pauly You could roll and shape with the bandages on, or take them off and put them back on. but again, thats up to your comfort level based on what the Dr told you. I also do not know the set up time of Bellafill.

I used to roll mine. Think like your rolling a stick trying to start a fire. BUT, i did from the bottom to the top and not really back down. The goal was try and not push anything out.

When you say that you stretch it "completely downward" how much stretching is that? Should we hit Erect length with the stretch?

I mean, when stretching AFTER a procedure it should be at he most downward angle to you can get it. As if you are standing up and it is down your leg. As for the amount of tension, thats totally up to the user. As I pointed out above, the more tension you use with a noose, or something similar, the faster the blood gets cut off and the more often you will have to release and re-attach. Each person will have to find their own comfort zones.
So dont target an exact length per say, target an amount of tension that gets your penis to comfortable stretched position where it will not retract; something you can tolerate for a while. OR, yeah, go for the max length you can; but you will simply be unhooking a fair amount and rotating devices more often. Both strategies work, find what you like and can tolerate based on your circumstances.

NOTE: I have done exactly that, going for the max. I had the house to my self, so I just walked around naked pulling my Dick with different things and rotating the devices and weight amounts a lot as I got irritated.

Remember, this is not like normal PE stretching where you can use any device available and stretch at any angle you want. This is very specific and for a specific purpose.

I’m having PMMA done at Advanti Derma Tuesday and have the still ons and autoxlsleeve, but I have a question about HA filler in the glans. Is it okay to use the sleeve attachment on the glans after an HA filler is used or will that mess it up. I’m just unsure here.

Kgbryan wrote: I’m having PMMA done at Advanti Derma Tuesday and have the still ons and autoxlsleeve, but I have a question about HA filler in the glans. Is it okay to use the sleeve attachment on the glans after an HA filler is used or will that mess it up. I’m just unsure here.

I'd advise asking Avanti Derma on this matter, good luck!

Great summary thank you Texas. A few questions
1) did you got errect before rolling/molding. I gues you did handroll and not used any OK hand grip?
2) you stated nothing should get attached to the shaft but some hangers you posted are using a silicon sleeve behind the head. Is that ok?

Thank You for asking these questions. these are great. Lets clarify them.

1. I do not get erect to roll. I roll VERY often. I do get erect a few times a day though and that is recommended by most doctors I consult with.
1.1 I do use an ok grip AT ALL. I feel it moves to much material around. When you heat things up like I do, we dont want to do that we only want to shape and mold and move as needed where needed.

2. I recommend different stretchers at different times. For immediately after a procedure, during the " AFTERCARE " phase of roughly 1 week, with a very very strong emphasis on the crucial first 3 days we only want devices that attach to the head/glans ONLY and or just behind it like a noose. THATS IT ! after this first week there are some other devices to be used, Still not a sleeve though at this time. I would a sleeves and vac stretcher is roughly at 3 week to 1 month mark.

2.2. there have been some guys on here that have modified their phallosans and other vac devices and think they have done well. I refuse to fight and argue over this so I just say ok and shut up. But here is the bottom line: DO NOT TOUCH YOUR DAMN SHAFT FOR AT LEAST A WEEK. lol. If you do in anyway, you are doing wrong.


NOTE: I have a patent pending product that is a recreation of a product that was discontinued by its creator. I will offer this once i get the first viable products in from the manf. Just a heads up, but this isnt a quick process.

@Joytoy please feel free to ask more and fire back. I think these answers are what people need to see and hear.

Texas
is all this Great Info you wrote down go for Avanti Derma Procedure ..??

@firstone4ash
This information is applicable to any procedure that does involve glans augmentation.

Thank you

You mentioned "prone position" for sleeping. That's laying on your stomach... did you mean that or did you mean laying on your back?

@Tyl2704
No, I 100% meant prone. There is a sentence following that one that mentions donut pillows.