PhalloBoards - An Online Community to Discuss Penile Girth Enhancement

Welcome, Guest
Username: Password: Remember me

TOPIC: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 10 months ago #1292695656

Alright gents, yesterday did a chem pe session as its done every other day but lately ive been doing it every third day and did some pumping as well to see where I can get the size to so here it is.

EG after pumping:
EG near Glan: 5 5/8
EG near MS: 5 6/8
EG near base: 6 3/8

EL not BP: 5 7/8 - 6\"
I couldnt get a photo ELBP not stretched but its like mentioned above 6 1/2+
Also ELBP fully stretched hits 7.0

Apologize for photo quality man its incredibly incredibly hard to stay max hard, get the measuring thing in correct position/place all the while making sure the photo comes out somewhat reasonably well enough to be worth anything and staying hard so by the time I was getting the right shot I was losing erectness but I think the numbers are pretty close to the actual.

So gents, I guess I apprehensively say that I do feel there has been some success in lengthening although maybe not as obvious and apparent as I\'d like it to be to be able to have a firm statement on it. I will continue the CHEM PE over the coming months and hopefully have some results more concrete and worthwhile to report - main issue I have is that I dont know what the starting numbers were or at least I have a doubt about them whether I measured in the same manner as before what would they be. Dr. A does have my BP fully stretched length so I guess the test will be what was the reading he recorded when we started this.

The mission continues.... I will return for PMMA before end of year Round 2 and am committed to adding PMMA to the Dick until its 7.0+.


Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 9 months ago #1292967706

Hows the chem PE journey going?

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 9 months ago #1292975636

Considering its only been a couple months of the chem PE, I would say that your results are significant. When you\'re in puberty its not like you grow a half Inch in length and Girth every month. I would much rather do this chem PE shit with Dr. A for 2-3 years than risk going through with all the complications that could result of PMMA. Your PMMA results are the best I\'ve seen though.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 8 months ago #1293172802

Well thats a good positive motivational note Ive been really lazy with chem pe lately but will kick it up again. I intend to keep it going as in my opinion I think helps with the penis health. On the other hand the instant result of PMMA is rather my preferred choice.

I delayed 2nd round but i will go for it soon. and cont the chem pe too. i know both contradict because in one need to break the collagen to grow and another builds collagen but hey....

Since I have been doing much pumping, chem pe, stretching i will throw in measurements shortly.

For best results, I think theres.... a couple of guys here so have some superb results but they had longer size.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 8 months ago #1293237534

Update as of today:

I just couldnt get a measurement on EL with photo, but roughly it measures BPEL 6 1/8 + 7/8 (space before where the reading starts as photographed and explained before) means EL without stretch NBPEL around 6-6 1/8 and with BPEL near 7.

For the Girth, MSEG before pumping was near 5 6/8 *yesterday, and after pump*today 6.
EG near base before pumping was near 6 3/8 *yesterday, and after pump *today 6 4/8 (you cant see it properly in the photo but thats what it was)

Now - for past 2 months I have been extremely irregular with the protocol but yesterday I did a session and ended up putting a bit more then normal, had a hard on pretty much all night and basically you shouldnt go to sleep but i did burpees to make it a little softer and I felt it was going down. but yeah it did stay groggy semi hard softer sort of even until morning.

I didnt pump yesterday and I pumped today. Also to add one thing that i feel maybe helping is Ive started TRT about 3 weeks ago, currently at 125 mg/wk of test enanthate. I think its giving a boost for sure to fullness of the Dick above and beyond the protocol


And when I say EG.... its the most Erect I managed to get a shot with.... hard AF to keep hard and manage the camera and get the photo right and put the measurement on.... I tried my best. Maybe if I was fully hard i could steal a 1/8 or 2 more. who knows. this is all for now!

Oh yes, I am going for second PMMA session booked for Sept 13.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293398996

Visited Dr. Adam and we measured and gained length by 0.5 Inch over last 6 months.

Did my 2nd round of PMMA today. Gotta go through the whole process again of post op care. Dr C put 14cc of 30% and 7 cc of 10% Lineasafe.

I like both of the above doctors! both are professionals and experts in their own areas. Dr. C and Wade were very happy with my results from round 1, said one of the best through post op care massage/stretch/pump etc. Lets see what the results are of second round.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293405051

In a private message to a fellow forum member:

I think in the other case when I spoke to Wade yesterday another guy who had done Dr. Adams chem pe gained 1\" in 1 year.

For me I dont care, I think Dr Adam\'s protocol helps with penile health in general. I just got 2nd round of PMMA done with lineasafe 14cc 30% and 7cc 10% yesterday. Im going to wait this out to settle down over next few weeks and will start pumping slowly again and Dr Adams protocol.

Dr. Adam\'s protocol is covered by my insurance and Im also getting Test replacement therapy with him plus I think he is a unique and fantastic doctor so Im sticking with him on not only Chem PE but overall as my health doctor too.

0.5\" in length with little or no stretching, and i guess in Girth there were gains too cause I went from maybe max 6.0 to 6.3\" after pump and without pump I think from 5.5 to 5.8-6.0 Girth is defo interesting.

I said on my page that Dr. Adams protocol requires patience and its more health oriented, PMMA is the fast fix for Girth.

So Im going to continue for a few years at least maybe forever.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293407078

Astrix, congrats on your gains. And what exactly is this Dr. Adams chem pe protocol?

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293407958

Bud, you gotta go through my posts on that. Covered everything.

PMMA Round 2 has been very easy I must say. Limited swelling. Operation was bearable specially since I think Ive gotten use to sticking needles in my Dick. Im hoping it eventually settles down well and gives me gains. If it is like last time I should be around 7.0\" Girth. Told the doc I want 7+ ideally Im thinking 7.5-8.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293415999

Do you think its realistic going from under 5\" Girth to 8? I honestly was thinking (for myself) going from 4.5 to 6 was unrealistic. What the heck does a 6inch penis with an 8\" Girth look like?? Haha- I\'d watch that porno! Haha.. Good luck and be safe astrix -

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293418036

Well Ive already gone from 4\'9 to 6\'0 without pump and 6\'3 after pumping. Length has gone longer from 5\'5 to 6\'1 almost even touching 6\'2 and around 7\'0 fully extended non Erect. So this time the doc put in 21 cc vs 17cc in first round and usually second round its less cause youve already taken up some space previously. It seems my volume carrying capacity has gone up since last time.

I must say second round has been like almost zero pain and the PMMA lineasafe is already almost settled in and its 48 hours since op. The new trainee Ian was so impressed with the fast healing that he took extra set of photos today cause he said that he wanted to have good post op photos however all penises looked so unpresentable that he didnt have any good success stories to show much.

Now the question is size wise where does the second round take me to, and I can say right now its pretty girthy, when they measured yesterday i was 12.5 cm non Erect (4\'9) pre op and 13.7cm (5\'4) non Erect post op. If pre-op 4\'9 grows to above 6\'0 fully Erect and if I maintain the same standard Im hoping ill be near 6\'5 + fully Erect or more ideally. I have touched 6\'3 with pumping fully Erect so I hope I can come near 6\'8-7\'0 after pumping and stretching in a few days time. Anyway - anything near 7 will be satisfactory for this round.

I am determined to go for at least one or two more around and cross 7\'5 Erect Girth without pump. What that monsterosity will look like... well if people want to pay to see Ill setup an online pay-per-show site to recover all the associated expeditures lol

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293440003

Recovery is going well. Entry points pretty much healed. Penis is girthier although Im reluctant to measure right now. I think its easily 6.3-6.5 without pumping. The pump X30 is too small now, my penis is maxing out on it so Im going to order the X50 Extreme for 350$ as that has a 9inch for Girth I believe. Penis is still kind of sore but seriously this round was like it never happened, almost zero pain, no excess water draining into Balls like last time took a few days to go, hardly any swelling, so Ill say so far so good now the results.

About size: Honestly I think once I crossed 6 I knew immediately that it wasnt enough. So far my penis looks good with 6+ and I think it can easily handle 7. Once I touch 7 ill know how much further Im going with this. But as of now Im committed to 7.5+ ideally without pumping. But time will tell. Ive got at least one more round in me.

The Chem Pe hopefully continues to give me gains ideally another 1-2 inc would be amazing. Im committed to both chem pe and PMMA (1-2 more rounds), will space each PMMA round by 6 months. so within next two years I hope to have the final product.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 7 months ago #1293568884

Ok this round has been interesting. On 13th Sept I had R2 done. the recovery was fast, limited swelling, no water in Balls like i had with metacrill r1, PMMA settled fast too and i guess i wasnt as attentive as first round although i know i did massage plenty first few days while i was in TJ. Once I left the massage became much less and I had a major surgery on 20th which basically took all my attention from there on until yesterday oct 2. I knew something was going wrong but i suppose hadnt paid a direct attention on it. so the shape of the penis started becoming like thicker at glan and getting slimmer as move towards the base. main reason for this was that there was some major lumps / PMMA clumping around the glan bottom working its way around and up and right side of the penis if youre looking it moving away from glan to. it was along the scar tissue of the Circumcision. yesterday i realized that not only it looked wierd but also felt horrible and since last night ive been major massaging it down, today i took a bath warmed it and pumped and worked it down and even though im 20 days out ive managed to spread it a little. i dont want to speak too soon but i feel with loads of hard massaging as max i could go on my penis ive managed to move the stuff slightly around so its not obnoxiously lumped. i think its spread a bit. what i messed up with is i let the penis turtle and that created certain areas of concentration of PMMA where penis was retracting to. since yesterday ive kept penis on wrap a lot of the time opening and going in hard with massaging. ill continue this with pump every day. the Girth is definately more i just havent measured. i took some photos but first i want to sort this out for good, i hope i can.

moral of the story - PMMA can be real messed up if you get it wrong. i was looking at posts of PMMA lumps and people get kenlog shots and surgeries to remove em. man this isnt an easy riskless game. it can f up your Dick. i hope i havent messed up mine but so far i fell im on the right track. i also felt some PMMA move today aside from massaging dwon the lumps which have become much smoother as long as i dont let the penis retract. with the way the penis feels it looks as if the PMMA still hasnt settled down, its still very rubbery if that has any meaning. when it gets Erect its solid, almost getting to the point that i cant hold it with fingers touching but isnt there yet, i certainly if i manage to get this round right want to continue with two more rounds and get thicker than my grip.

i just want it to be thick and painful. i want to enjoy the look of fear and hear the screams of pain. before i get too far, need to fix this lumpiness. keeping fingers crossed.

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 6 months ago #1293575639

Happy to report that the aggressive massaging coupled with pumping and using light wrap to stop Turtling so far seems to have worked. Kept wrap on since two days ago and keep massaging every once a while and when I went into the bath today for pump and push (massage) the lumpiness pretty much wasnt there. I worked on the glan areas pushing any bit of PMMA away and really couldnt find much lumpiness. When I would leave the penis and it would retract then it would collect quickly in the same usual suspect areas along the scar line. I guess Im going to keep the wrap on until I feel the PMMA really has settled down and isnt lumping anymore, lets see how long that takes.

But Im really glad i took corrective action when i did, almost 20 days out of the surgery because had i not and had this settled like this it would have been a real spoiler to the positive first round. I think i may just come on top with success this round too.

with the x30 hydromax my penis is maxing on it, i ordered x50 extreme cost around 400$ CAD and is on its way, this is the max size they have with Girth 9 Inch so im looking forward to what i can pump out with that.

i havent started the chem pe yet, i want PMMA to settle down real good then ill get to that cause theres are lot of Jelqing and jerking with that for about an hour every other day.

So far im happy with round 2, and in six months ready for round 3! I know now for sure i want my FG at 6+ and EG around 7.5+

Please Log in or Create an account to join the conversation.

Astrix's PE journey (PMMA/Chem PE/extender/pump etc) 7 years 6 months ago #1293585053

These are shots from the clinic, the pre op photo on left and post op on right

either my Balls have become smaller or my penis has become bigger hehe


Please Log in or Create an account to join the conversation.