PhalloBoards - An Online Community to Discuss Penile Girth Enhancement

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Round 1 PMMA with Rupeka June 17

Round 1 PMMA with Rupeka June 17 5 months 6 days ago #1308717668

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
I’m getting 20+ vials (16+cc) of PMMA with Doctor Rupeka this week. My stats:

BPEL: 7.2”
MSEG: 5.6”
Attached photos are candid with poor EQ.

My goal: Get over 6” Girth this round.
Final goal: 6.5”-7” Girth (Depending on what my small GF can take)

I’m 25, fit, 3 years of PE experience. I had an adult Circumcision a few months ago just for this procedure, so I’m hyped to say the least! Some questions for the forum:

- Could a P-shot help my healing and outcome? I’ve heard Dr. C say this but can’t find studies.
- How soon should I use an all day stretcher?
- Is 20 vials (16cc) too conservative, given my starting size?
- Could this affect peyronie's disease? I developed mild curving this year. It’s more noticeable when semi-hard, not so noticeable when Erect. Hardly noticeable when using viagra to improve EQ.

I’ll update the board with pics of my progress!
Attachments:
  • HA dermal fillers comparison.jpg

Please Log in or Create an account to join the conversation.

Last edit: by alias9. Reason: *round 1 of PMMA

Round 1 PMMA with Rupeka June 17 5 months 6 days ago #1308717669

You are young and already statistically huge. Why not put some miles on that natty Dick for the next ten years and then revisit this? I’m not judging because we all want to be bigger or we wouldn’t be here. But you’re already very big and have lots of good sex in front of you.

I’m pulling for you either way but most guys strive to be that big enhanced .

Definitely commit to the after care like your life depends on it bc your Dick DOES depend on it. Good luck and I’ll be following this journey.

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 5 months 6 days ago #1308717670

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Thanks for the reply! I’ll update you all after the procedure in 2 days.

My reasoning for PMMA:
- I want to get as much use out of PMMA as I can while I’m young. PMMA is a depreciating asset IMO, I think it’s worth more when young and sexually active. Doing PMMA early means more years of use out of the procedure
- I make adult content as a hobby so I’m held to a high standard
- I don’t want to feel the need to pump before scenes or with my partner

Do you think a PRP injection increases my risk of pumping/nodules or decreases it? My goal now is to do whatever I can do to mitigate risk.

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 5 months 5 days ago #1308717678

Not sure about prp, add collagen sups, pre and post, can’t hurt , might help, and gives your body the building blocks. While you’re already near the end of the bell curve, this is a tool you CAN use with more.

If I knew about DHT as a teenager I would have been bathing my Dick in it, Now that we have fillers, I’m using those, and would have in my 20s without hesitation. Even now I’m using fillers and will transistion to PMMA when I have the time . Go for it and enjoy!!

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 5 months 4 days ago #1308717687

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Just finished round 1. Rupeka injected 15 vials (12cc) plus PRP. I’ve attached photos, including semi Erect pics and a POV shot while I was being injected.

Dr. Rupeka was amazing. He delivered a presentation on fillers, answered all my questions, and performed the injections with incredible s. The injection process took less than 30 minutes.

No real pain, just itchiness/soreness. Flaccid length seems significantly longer, but this is likely from swelling and engorged bleeding penis. Less injected near tip for a taper, but Rupeka discussed this beforehand. I can get more there when I return. Unless you guys think I can massage it up?
Attachments:
  • HA dermal fillers comparison.jpg

Please Log in or Create an account to join the conversation.

Last edit: by alias9. Reason: More Photos

Round 1 PMMA with Rupeka June 17 5 months 2 days ago #1308717704

What are your current measurements? Any problems getting Erect?

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 5 months 2 days ago #1308717710

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Unfortunately, at day 3 gains aren’t so impressive. Hopefully they'll improve over time.

BPEL: 7.1 (lost 0.1 inches)
MESG: 5.75 (gained 0.15 inches)
Base Erect: 5.75 inches (gained 0.2 inches)

Day 1 and 2 looked like great gains, but I assume a lot of that was swelling. I only did 15 vials (12 CC), so I suppose that’s to be expected. But hopefully I gain more as the collagen bovine matrix dissolves. The look is very natural, no lumps or bumps.

Flaccid gains are extremely noticeable though (0.5 inches or more)

Please Log in or Create an account to join the conversation.

Last edit: by alias9. Reason: New girth measurement

Round 1 PMMA with Rupeka June 17 5 months 20 hours ago #1308717731

You are on the longer end, so yeah that is somewhat of a modest volume. I'd expect more, though. Still early though so who knows.

I do think it's useful that I've seen you and others lately paying attention to the total volume of product as well as the concentration.
So where 15 x 0.8mL syringes is 12mL and only 20% of it is PMMA, that's 2.4mL of PMMA.
While 15 x 1mL syringes of 30% product gives you 4.5mL of PMMA.
People comparing their Bellafill results on a per-syringe basis to e.g. Linnea, it isn't going to be similar. Higher concentration, in a larger syringe.
25 Bellafill syringes is 20 Linnea syringes, with fewer PMMA spheres per each syringe (20% vs 30%)

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 5 months 12 hours ago #1308717734

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Day 4: improvements!

BPEL: 7.2
MSEG: 5.87

My current routine:
Hanging 4-5+ hours daily with the still-on-systems stretcher
12,000mg Collagen
Anavar (Oxandralone) 25mg daily to stimulate collagen production
Warm compress to reduce swelling

I still have soreness all over the shaft. But Erection quality was much better today, though getting an Erection is still painful, at least at first.
Attachments:
  • HA dermal fillers comparison.jpg

Please Log in or Create an account to join the conversation.

Last edit: by alias9. Reason: *measurement

Round 1 PMMA with Rupeka June 17 4 months 4 weeks ago #1308717750

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Day 6: huge improvements! I’m satisfied

BPEL: 7.25
MSEG: 6.05
Base Girth: 6.1

I took viagra and Cialis to measure at full volume. Pleased with the results :) looks very natural too
Attachments:
  • HA dermal fillers comparison.jpg

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 4 months 3 weeks ago #1308717778

  • jick975
  • jick975's Avatar
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 13
  • Thank you received: 0
Thanks for the updates man!

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 4 months 3 weeks ago #1308717779

It gains over time as the collagen builds up right?

Your starting measurements are pretty close to mine so this is really good info. Thanks for posting!

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 4 months 3 weeks ago #1308717790

Why did you only get 15 instead of the planned 20+?

Please Log in or Create an account to join the conversation.

Round 1 PMMA with Rupeka June 17 4 months 3 weeks ago #1308717792

  • alias9
  • alias9's Avatar Topic Author
  • Offline
  • Pending Email Verification
  • Pending Email Verification
  • Posts: 25
  • Thank you received: 14
Q: Why did I inject 15 vials and not 20+?

I left it up to the expert, Dr. Rupeka. He does not over inject. 15 vials was how many he thought he could safely put in without risking a lumpy outcome. I asked him to be conservative and avoid any deformity. I would probably come back for more later anyway, and I made that clear to him.

Injecting less was for the best—at 6.05 MSEG and 6.1” base, I’m nearly too big to even penetrate my GF. I think size inflation (ie dudes lying) makes guys not realize that many women can’t take extreme Girth over 6”, let alone enjoy it.

My goals are less ambitious now. When I go back later for another round, it will likely be more of a touch up to get to 6.5”, or to make up for any gains I may lose in the future. But I’m very glad I got to try this larger size without committing to an even larger one. Now I have a different perspective on sizes over 6”

Q: does collagen build up over time increasing size?

Yes and no. A bovine collagen matrix (80%) and PMMA (20%) are injected. The collagen matrix injected immediately gives you major increase in size. Over time, the injected collagen matrix breaks down and is replaced by the body’s natural collagen production, stimulated by the injected PMMA beads. So I’m the doctor’s words “results improve over time”. I’m probably butchering that explanation, but that’s my understanding.
The following user(s) said Thank You: 7indream, JJones928

Please Log in or Create an account to join the conversation.

Last edit: by alias9. Reason: Key numbers

Round 1 PMMA with Rupeka June 17 4 months 3 weeks ago #1308717798

alias9 wrote: Q: Why did I inject 15 vials and not 20+?

I left it up to the expert, Dr. Rupeka. He does not over inject. 15 vials was how many he thought he could safely put in without risking a lumpy outcome. I asked him to be conservative and avoid any deformity. I would probably come back for more later anyway, and I made that clear to him.

Injecting less was for the best—at 6.05 MSEG and 6.1” base, I’m nearly too big to even penetrate my GF. I think size inflation (ie dudes lying) makes guys not realize that many women can’t take extreme Girth over 6”, let alone enjoy it.

My goals are less ambitious now. When I go back later for another round, it will likely be more of a touch up to get to 6.5”, or to make up for any gains I may lose in the future. But I’m very glad I got to try this larger size without committing to an even larger one. Now I have a different perspective on sizes over 6”

Q: does collagen build up over time increasing size?

Yes and no. A bovine collagen matrix (80%) and PMMA (20%) are injected. The collagen matrix injected immediately gives you major increase in size. Over time, the injected collagen matrix breaks down and is replaced by the body’s natural collagen production, stimulated by the injected PMMA beads. So I’m the doctor’s words “results improve over time”. I’m probably butchering that explanation, but that’s my understanding.


Ok that makes a lot of sense.

I've had HA and I'm currently at 6"+ Girth but it is going down slowly. I was sitting at 6.5" maybe 6 months ago. I know for sure my wife is able to take that size. She was extremely tight at first but after a few times of having sex she was able to take it with no issues.

I was going to get 30 because I'm slightly longer then you but not by much. After reading what you said in your reply it makes a lot of sense, so I'll likely dial that back to 15-20 and see what the doc thinks.

I appreciate your reply!

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Moderators: hoddle10bricebdstern22NoxcuseTexasDream