TOPIC: Stretcher with a wide base for large girth (Photos Inside)

I received my first round of PMMA with Dr. C in January (I will post the story soon) and now I have the rather welcomed problem of not being able to fit into my ADS stretcher (Andropenis) anymore. I sent an email to the company asking if they had a stretcher with a wider base and they said they didn't. I also looked through V2 of this forum, and while there were some suggestions, none of them seemed adequate (X4 has a "wide Girth" base but it is only bigger vertically rather than horizontally, where the extra width is actually needed).

I'm probably now around 5.8 - 6" in Girth, which isn't as big as many on here, so I'm just wondering if anyone knows of a company that makes a wider sized stretcher or if anyone has successfully rigged / made one themselves?

I was wondering the same thing. It appears X4labs shut down, so their wide base doesn't exist any more. Has anyone found one anywhere? Or any advice on what to do

You should contact Marlon at LG Hanger. He'll be able to make an extender to your specification. Also, he has available XXL silicone sleeve for PMMA girth guys.






lghangerllc.com/

360-294-8944

I got in contact with him, but unfortunately he only makes wide bases for his vacuum style hangers, not the noose style. Anyone have any other leads?

here is an alternative. You should contact mike "total man PE products". I also have Total Man 2.0 Rod extender. My erect base circumference is 6.5 inches and I am not having any issues with his extender. If your flaccid base circumference is under 6.5 inches, you should have no problems. The extender cost only $70.00 and works with any vacuum chambers and compress attachment.

Mike email address: This email address is being protected from spambots. You need JavaScript enabled to view it.

https://totalmanshop.com/collections/full-kits/products/penis-extender

https://totalmanshop.com/collections/full-kits

If you forward the video to 11:15. You will the extender.

tbone777 wrote: here is an alternative. You should contact mike "total man PE products". I also have Total Man 2.0 Rod extender. My erect base circumference is 6.5 inches and I am not having any issues with his extender. If your flaccid base circumference is under 6.5 inches, you should have no problems. The extender cost only $70.00 and works with any vacuum chambers and compress attachment.

Mike email address: This email address is being protected from spambots. You need JavaScript enabled to view it.

https://totalmanshop.com/collections/full-kits/products/penis-extender

https://totalmanshop.com/collections/full-kits

Thank you! Just ordered the Total Man extender. I will post here about how it works out.

While the Total Man extender looks like a medieval torture rack it does the job. It is wide enough and I like how the springs work to keep the tension tight. It's a pretty robust device and is extremely well made. The only downside is how big it is. There is no way to wear this one concelled under clothing. Like with all stretchers / all day hangers, I would recommend switching up between different styles throughout the day to stave off soreness and those little superficial -- though annoying -- injuries that come from wearing any single device for two long. Right now I'm switching up between the Total Man and a noose style steel ball Hanger.

@Jacks10
Good point. I switch up my gear all the time to try and avoid injuries from using one thing to long. for me, that mostly means vacuum pressure.

Just to let you guys know... you can make the total man extender smaller in length. You will need to purchase new Threaded Rod At Ebay/Amazon. If I am not mistaken it is 6m size.



https://www.amazon.com/dp/B08952R777/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B08952R777&pd_rd_w=jZfpA&pf_rd_p=7d37a48b-2b1a-4373-8c1a-bdcc5da66be9&pd_rd_wg=89zDt&pf_rd_r=GMDSV0NMENEF6FCA5QG4&pd_rd_r=4cd4890f-9792-4b9e-a29f-1de71400d112&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZR0RTT1ZVSVIxM1YmZW5jcnlwdGVkSWQ9QTA1NzE4MjAyQjFENDMyTUQ2WEpKJmVuY3J5cHRlZEFkSWQ9QTA0MjU4MzQyNkNDVU9aWEFEQlRYJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==


https://www.amazon.com/gp/product/B01LYO1BOS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

You can also purchase Threaded Rod at the following websites:

https://www.grainger.com/?ef_id=Cj0KCQiAw_H-BRD-ARIsALQE_2OuGdqY23MDvdIGiZNm2RGV9U6XwG13r476zoLRPPJISWIKBq1lKcUaAiGREALw_wcB:G:s&s_kwcid=AL!2966!3!192095876383!e!!g!!grainger&gucid=N:N:PS:Paid:GGL:CSM-2296:13W2P6:20500731&gclid=Cj0KCQiAw_H-BRD-ARIsALQE_2OuGdqY23MDvdIGiZNm2RGV9U6XwG13r476zoLRPPJISWIKBq1lKcUaAiGREALw_wcB

https://www.mcmaster.com/

tbone777 wrote: Just to let you guys know... you can make the total man extender smaller in length. You will need to purchase new Threaded Rod At Ebay/Amazon. If I am not mistaken it is 6m size.



https://www.amazon.com/dp/B08952R777/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B08952R777&pd_rd_w=jZfpA&pf_rd_p=7d37a48b-2b1a-4373-8c1a-bdcc5da66be9&pd_rd_wg=89zDt&pf_rd_r=GMDSV0NMENEF6FCA5QG4&pd_rd_r=4cd4890f-9792-4b9e-a29f-1de71400d112&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZR0RTT1ZVSVIxM1YmZW5jcnlwdGVkSWQ9QTA1NzE4MjAyQjFENDMyTUQ2WEpKJmVuY3J5cHRlZEFkSWQ9QTA0MjU4MzQyNkNDVU9aWEFEQlRYJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==


https://www.amazon.com/gp/product/B01LYO1BOS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

That's true. Thanks for the links. I could also just hack saw it down a little ... but it would still be way to big to conceal anyway, so maybe not worth the effort. It's really not as much of an obstruction as it at first seemed it would be if I'm just wearing it while at home.

@tbone777 have you had any results from it?

What noose and Balls are you guys using?