PhalloBoards - An Online Community to Discuss Penile Girth Enhancement

Welcome, Guest
Username: Password: Remember me

TOPIC: Astroboy's PMMA (girth) and Radiesse (chin) blog

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276222814

Day 12 (penis)

Back home (Australia) after my holiday in the USA (via Tijuana of course!).

Have had a chance now to measure my penis, and Girth is around 13.5cm in these photos (5.3 inches). At this point in time it\'s approx a 1 Inch increase on pre-PMMA numbers.

The below photos don\'t show fully Erect length (of which I may have lost a bit?).

Swelling around the circ scar has basically disappeared. Still have huge lumps at the base of my penis which are impacting the direction of the penis a bit. I\'m hoping they go down in time, otherwise I\'ll look at a Kenalog injection. The thing is, I\'ll need to get an Aussie cosmetic surgeon to perform the injection as I can\'t go back to Mexico just for that.

Alternatively I could wait for a round 2. Let\'s see.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276222885

Day 13 - Sex... Kinda!


So in November I met this Asian girl, and we\'ve been dating. We started fooling around in early December, but knowing in mid-December I\'d be getting a penis enlargement I did my best to conceal my penis from her until post-enlargement. Being a red blooded male though, I couldn\'t help it so I was showing her my Erection in pre-PMMA state and letting her hold it. However there was no sex or masturbation. I decided not to tell her about my enlargement plans.

Fast forward a few weeks and I\'m back in Australia having had PMMA a fortnight ago. Last night I was at her house and we\'re fooling around again. Interestingly, she didn\'t say that she noticed a difference (I\'m happy about that.. no explaining to do). However, she did call my Cock a \'sausage\', and \'huge\' and \'fat\'. She gave it a couple of blow jobs and it was an amazing sight to see her wrap her lips around it. She also enjoyed holding it. As it turns out, the girl is close to being a deep throater and can nearly go Balls deep on my thick new manhood. That\'s the good news.

The bad news is that I also discover this girl has done anal sex a lot in the past (yippee!!!) but says my Cock is too thick for her ass (nooooooo!!!!!!). Just my luck.

We didn\'t have sex but I attempted to slot a condom on regardless. It was a Sagami 0.02mm from Japan (it\'s meant to be the world\'s thinnest condom). Anyway, this condom could fit me pre-PMMA (I bought the small Girth ones), but last night I couldn\'t get it past my glans. Crazy sight. I\'m going to have to go condom shopping if I want sex with this girl.

So in the weeks and months ahead, it will be interesting to see how my penis size changes and whether I can persuade her to give me a chance up her highway

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276222988

kman86 wrote: What are your thoughts of the pmma in the face? How much did that cost? Is there a bigger risk of problems when pmma is injected in the face?


Hi Kman86,

It cost $180 per cc from memory (6x $180 = $1080).

I\'m not a doctor or subject matter expert so can\'t talk about risks etc. I\'m just a regular Joe.

I had noticed from about day 10 a nodule (ie a hard ball) at one of the canula entry points on my jawline. It actually grew quite large so I felt like an idiot and on the last day of my holidays (a Sunday) I was googling for a cosmetic surgeon that would be open in LA that performs Kenalog injections. Couldn\'t really find one so decided to get the injection done when back in Australia. Anyway, now that I\'m back the lump has 90% disappeared which is a relief. Will probably completely disappear in a couple more days. No need for injection after all.

You can read more about nodules/granulomas here:
www.realself.com/review/artefill-artecoll-lumps

I\'m hoping the lumps around the entry points on my penis also disappear in time. Those nodules are larger and harder though.

I have thought about what might happen when I age and the skin changes location etc. Eg what happens when the skin that started on my jawline ends up becoming my neck etc in 15 years time. Who knows. I don\'t have an answer other than hoping for the best. Going with PMMA was a snap decision whilst I was on the doctor\'s operating chair. I do know that I feel that my chin and jawline are more pronounced (in a fairly subtle way), which is the look I was seeking. I\'ll see if I can edit out my identity and upload some before/after face shots.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276223116

Hey Astro boy looking good!im coming from Australia too.

So have had a look and can\'t see what were your starting measurements in regards to Erect Length?

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276223299

Hi Hans,

You know what - I haven\'t measured Erect length in quite a long time but depending on how hard I jab the ruler into the fat pad from memory it\'s 14 - 16cm. It got over 16cm in my Hanging days but it\'s been most likely 14-15cm in more recent years. I measured the other day and it was 14cm.

For the record, I took Virgin Australia from Sydney - LA and had great flights. Really recommend them. I then took a flight from LAX to San Diego, but probably should have hired a car instead.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276251029

Day 14 (penis)

The psychological change has been interesting.

I feel I\'ve adapted quickly to my new shape. I feel PMMA is me. I\'m feeling more masculine. I\'m feeling more complete.

I was never consciously lacking confidence in life but over the last fortnight, I have a greater sense of wellness and vitality. I realise it\'s only a couple of centimetres of Girth increase, but when I feel the weight of this thing, when I feel it constantly down the side of my trouser leg, I feel alive and more animalistic. It\'s a strange feeling being constantly aware of this thing. My enlarged Flaccid penis is me, yet often feels like my buddy, my partner in crime. A fascinating duality.

Yesterday I had a short black espresso and a good Flaccid hang that was wrapped, with accompanying huge trouser bulge, and I\'m walking around the main st and shopping centre of my suburb like I can attract any woman I come across. I\'m staring into their eyes and at their cleavage. I had a clear mind and my blood was flowing. It felt good.

When I\'m Erect, my penis is either straight (when it\'s fully engorged) or curved (half engorged). It\'s something I try to correct but isn\'t affecting function in any way.

I brought out my Bib Hanger yesterday and hung for the first time in years. My girlfriend is Asian and short so I\'m not after 8 inches, but if I can get to 6 inches in length that would be more aesthetic.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276252215

Thanks for the comprehensive updates Astro.Ill be over in the US anyway on the East coast and plan to fly to the west.Its amazing the difference a bit more Dick can make.I had a bit of a feeling like that earlier this week when i felt i had made Girth and possible small length gains from Hanging/stretching/Jelqing.It made me question whether or not to still get PMMA.If manual stretching can do the trick.But it IS taking up a lot of my life, and cementing them is going to take years when PMMA would be a much quicker,albeit riskier solution.Your results are amazing.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276263067

  • 's Avatar
  • Visitor
  • Visitor
Astroboy, thanks for detailed log of your experience and congrats on your success. You have good aesthetics and bc of the size of your glans can probably go even bigger and still look perfectly natural. I wish I had that problem lol. My glans are already being dwarfed by my new size, especially when Flaccid, and next round I am going to have to get the taper more exaggerated to keep things looking real. If I would have known we would be there at the same time we could have had a beer. Anyway, best of luck to you and I will be following your progress.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276265996

Day 17

As we can see in the photos, I\'m still holding 13.5cm girth, which surprised me because it\'s started to feel a little bit less bulky than it had. Perhaps it\'s a case of me getting used to the new size.

Did some more light stretching today with my Bib Hanger. At this stage it\'s just 1 set for 10 mins at a light weight. I can feel the suspensory ligs getting stretched. Will get a ruler soon so I can measure and baseline erect length. My guess is 14cm bone pressed. It was 16cm once upon a time during my hanging days.

Have also been wrapping my penis in bandage during the day. There\'s a noticeable bulge but I\'ve been on holidays so easy to conceal. It\'s early days but I suspect it helps to straighten my penis a bit. Unfortunately I go back to work in two days time.

I\'ve also ordered an ADS ( www.autoextender.com/krextender.html ) which will be delivered in a couple of weeks, I\'m guessing. Looking forwarding to testing that out.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276288582

From a fello Aussie, congrats
I also could not be happier with my PMMA.
Hope it keeps going well for you,
I am now thinking of a 2nd round @ 30% to beef things up
all the best my PMMA brother

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276333256


I got rid of my pubic hair this morning so thought I\'d take some Flaccid pics. As of the last day or so, some small hard bumps have developed on the left side of my penis towards the glans. They can\'t be seen in the photos. I\'ve massaged them a little but they\'re so hard I don\'t think massage will do anything. I hope they disappear.

I still have a lot of tight skin and curvature which isn\'t so pretty, but it straightens up when at full Erection at least.

Still also have very large bumps all around the base of the penis. I suspect back on day 0 and 1 whist the PMMA was setting, I didn\'t massage the PMMA up into my penis enough. It\'s not the end of the world but it\'s something I\'d like correct if I go for a round 2. So jealous of the USA guys who can spend only a hundred bucks or so to get to Tijuana. It costs us Aussies thousands as well as alot of time.

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276415909

  • 's Avatar
  • Visitor
  • Visitor
looking good astro!!

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 10 months ago #1276420283

Thanks Notsure and Cain.


Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 9 months ago #1276595146

Great results astroboy...

Its a long way to travel from australia but I think its worth it. I fly out of brisbane on the 5th feb for rd 3 and rd 2 in my biceps. Cant wait, looking forward to getting away from this hot weather lol...

paso

Please Log in or Create an account to join the conversation.

Astroboy's PMMA (girth) and Radiesse (chin) blog 11 years 3 months ago #1279019146

Hope everything went well? LMAO

Please Log in or Create an account to join the conversation.