Round 2:
So I get in the office and Wade calls me into the office where they do the
PMMA work. I put on the gown in the washroom and come out for inspection / photos.
As soon as Wade sees my penis he was very very happy with how round 1 turned out for me. He was actually quite amazed. Apparently my round 1 results were one of the best he has seen if not the best. As far as weird shapes and touch ups go. He said for a round 1 my results were quite natural looking and very aesthetic.
He was quite surprised that my ring under the head was barely visible and same with the base. The only real touch up / abnormality that needed any real attention was the fact that I had a bulge mid-shaft that was somewhat noticeable.
When Dr. C came in Wade was quite happy to show him how \"perfect\" my round 1 results were. Dr. C agreed and pulled up my file on the computer to recall exactly what he did. His response was something like: \"See, this is what we should be doing every time.\" He must log what he does and how he does it for each patient.
After seeing my results from round 1 Wade originally wanted to only correct the bulge (meaning filling above and below it so the shaft is more uniform)... BUT, personally I wanted to end up larger than 5.5\"
Girth so I told him that I really want similar results to round 1... I really wanted another 0.75\" gain like last time.
I could tell he was a little hesitant to do that because he believed the results were looking very aesthetically pleasing and he didn\'t want to mess that up... but he obliged to my wishes saying if its another full session I wanted, I will get it.
Since there was a bit of a bulge they needed to put most of the
PMMA above and below it with only a little bit being placed in the middle so it turned out uniform. My base actually got the most of the
PMMA which wont be too bad since it was already 6\" on a good day, 5.75\" on a cold day haha. I\'m expecting 6.5\"+ in the base for sure.
In the end I got 18cc which puts me at 40cc total if you include both rounds. I am lucky that I only really needed 0.5\" of a
Girth gain to reach 6\"... I am hoping this will be enough to get there. I believe it should be.
After the procedure it took 5 f**king hours to get across the border... 3.5 hours to reach the border from the clinic, then my driver and I had to go to secondary inspection... I guess a Mexican driving a 22 year old Canadian across the border after a one day trip to a
Dermatologist is a little fishy and needs further investigation.
The border official didn\'t understand why I would fly from Canada to San Diego then drive to TJ for a day, then back to San Diego for the night then back to Canada the next day... and the fact that the only extra cloths I brought were a pair of shorts... he thought something didn\'t add up. I told him I got a cosmetic procedure from a
Dermatologist. Then he asked what exactly I had done. I responded with I received a series of injections with a tissue filler. At this point I was 99% sure I would have to go to some back room and show him, but luckily he stopped there and said ok.
By the time I got to the hotel I was in the car for 5 hours! I took a few pics but can\'t upload them until I get home.
So in summary, round 1 was so good they didn\'t want to mess it up. I believe I got another full session, but it was a little more conservative than my first was (4cc less than the first). Personally I hope this will be enough to reach 6\" mid-shaft... If I fall short of that I will be a little bit disappointed to be honest.
Pics coming soon.