TOPIC: Pumps for PMMA after care

The x30 extreme and x40 are powerful, but those who don\'t have the money for it may pick the older models. I can bet they will be disappointed. My Hercules broke in less then 2 weeks, then it was hell to receive another and that one broke too.

My X40 seems to be of exceptional quality. I have no desire to gain size; simply to exercise the penis and maintain postoperative results. I still exhibit great aesthetics at 16 days post touch up. I\'ve been using the X40 for 8 days.

Tell us how it go

Wade told me that i could pump after a month.

I started at day 8. But... I had mostly Silikon 1000 and a little PMMA at the base.

The water pump is terrible... JUST TERRIBLE! lol.. I go on the manual PE sites and the newbies praise that thing. I purchased the bathmats in 2008 or 2009 when it was pretty new, and still have it. It was uncomfortable, sucked in my (ball) EVERY TIME which was painful, and I NEVEr got a good pump. And dont try to use it in the shower or by just pouring water in the third. Doesn\'t work! I got a kaplan air pump in 2013 and this thing has been very good to me. I\'m just saying dont always believe the hype. These bathmats creators just got lucky with marketing and guys bit.

I went to the site, and now theirs several versions.. I may try the new smaller version just for my sanity to see if I just was too small for the original, but I dont look forward to submerging myself in my own water filth everyday.. I\'m a shower guy and like simplicity. By the time I run the water and get settled in, I\'d be on my second set already with my handy Kaplan. Just my $0.02. Oh and I\'ve dropped that thing multiple times and the suction is just like the day I bought it.

you don\'t need a bathmate to water pump. you can use a regular air pump with water, you just can\'t let any water get i the air valve thing. theres threads about it on pegym. its also more safer than bathmate because you have more control over the pressure

I suppose I should chime in here... been pumping now myself for about 3 or 4 days to see if I was doing it poorly before...

I do 3 x 5min sessions (sometimes I extend a session to 10min) with a normal pump / gauge and water (similar to how purple donkey described above) I simply fill the tube about 1\" above my glans with water and by the time I get to the 3rd session the water in the pump is almost entering the valve but not quite. I never pass 5hg of pressure.

Works like a charm. And so far so good with it. No extra ridges or anything showing and if anything its even made things look even better... Evened things out and made it more uniform. Though I guess the true test would be to pump for a week and then have like a week off.

I suppose I\'ll hold my judgement on pumping... water pumping does seem to make a bit of a difference. I don\'t think I\'d ever use a bathmate though... I enjoy my standard pump and gauge (brake bleeder pump / gauge, Colt 2.75\" Cylinder with quick release valve).

I\'ll keep you guys posted on if this affects my PMMA

Sizemic wrote: I suppose I should chime in here... been pumping now myself for about 3 or 4 days to see if I was doing it poorly before...

I do 3 x 5min sessions (sometimes I extend a session to 10min) with a normal pump / gauge and water (similar to how purple donkey described above) I simply fill the tube about 1\" above my glans with water and by the time I get to the 3rd session the water in the pump is almost entering the valve but not quite. I never pass 5hg of pressure.

Works like a charm. And so far so good with it. No extra ridges or anything showing and if anything its even made things look even better... Evened things out and made it more uniform. Though I guess the true test would be to pump for a week and then have like a week off.

I suppose I\'ll hold my judgement on pumping... water pumping does seem to make a bit of a difference. I don\'t think I\'d ever use a bathmate though... I enjoy my standard pump and gauge (brake bleeder pump / gauge, Colt 2.75\" Cylinder with quick release valve).

I\'ll keep you guys posted on if this affects my PMMA

Interesting.. Questions?
1. do you hold the pump upside down when filling in the water?
2. how do you know exactly how much to put if you can\'t measure it.
3. do you do this standing to not risk the water falling out?
4. when you come out between breaks do you you refill?
5. Is lube still required?
6. whats the difference you achieve when its filled with water vs just air?

I didn\'t even know this was possible? I may try it, if I can get the effect without having to actually use the bathmate.

I always hated the Bathmate too. I\'ve had two that just flat out stopped working on me. Have no idea why. Also the water thing is a huge pain in the ass.

I\'ve never pumped, hadn\'t even heard of it until after I got PMMA so I assumed it was a non option for me as I\'d read it can wreck your results. Does pumping really boost your size temporarily? I wear a Cock ring already so I don\'t mind that if I need to. Does it make your glans bigger, again temporary is fine. Length? I know, lots of questions, but you guys will know better than anyone, and googling a topic like this is worthless. Thanks, and thanks sizemic for retrying your pumping experiment.

Dance With Dragons wrote: I\'ve never pumped, hadn\'t even heard of it until after I got PMMA so I assumed it was a non option for me as I\'d read it can wreck your results. Does pumping really boost your size temporarily? I wear a Cock ring already so I don\'t mind that if I need to. Does it make your glans bigger, again temporary is fine. Length? I know, lots of questions, but you guys will know better than anyone, and googling a topic like this is worthless. Thanks, and thanks sizemic for retrying your pumping experiment.

Wait.. Your saying you never heard of pumping? or bathmate? If your at least over 25 and had dirty mags them pumps was plastered all over the magazine ads.. lol.. Used to mess up my concentration.. lmao

New1inch wrote: Interesting.. Questions?
1. do you hold the pump upside down when filling in the water?
2. how do you know exactly how much to put if you can\'t measure it.
3. do you do this standing to not risk the water falling out?
4. when you come out between breaks do you you refill?
5. Is lube still required?
6. whats the difference you achieve when its filled with water vs just air?

I didn\'t even know this was possible? I may try it, if I can get the effect without having to actually use the bathmate.

I\'ll try my best to explain what I\'ve been doing.

1. - I fill my bath tub with warm-hot water and sit inside it.
- I\'ll tilt the tube in the water until it\'s about 1/3rd full of water (my tube is 9\" so the first 3\" or so).
- Then I\'ll slide my semi-Erect Dick in and start the suction process with the tube tilted at around 45 degrees.
- As the pressure builds the water gets closer to the valve hose opening so I end up laying back and having the tube at 90 degrees from my body (if I were to lay all the way back this would be straight up and down but I don\'t lay all the way back, just a relaxed position.

2. I don\'t really measure it, if I get my Dick in and it seems like there\'s too much water i\'ll lift the tube a bit and let some out. For me the ideal is a little less than 1\" of water above my glans (I\'m about 8\" BPEL in the tube).

3. I sit in the tub, usually the seal is pretty strong, something about having the seal below the water line makes it easy to get a good seal.

4. For breaks I usually let the water right out and take the tube off and massage things a bit and make sure I don\'t have any discoloration going on... usually my break is only about 1 minute. Then I repeat the process for getting water in and doing it again.

5 & 6. I believe the difference between water vs air is in a few key areas:

1) The seal is easier to get when you keep the base of the pump just below the water and I don\'t get any weird ball-sack suckage into the tube.

2) The water helps displace the open spaces leading to less swelling, weird ball-sack suckage and better aesthetic pumps (I have yet to get any weird pumping donut that I used to get)

3) The warmth helps reduce discoloration and encourages better bloodflow within the skin. Edit: The warmth also likely helps you fill the tube faster... I fill mine after the 3 sessions... though I used to pump a lot prior to PMMA so that could be part of it.

4) I use little to no lube... towards my 3rd session I start to really fill the tube so I will sometimes use lube or moisturizing cream before I stick it into the tube, but I use far less than I would if it was air.

Also I should mention that today when I woke up I was again around 0.25\" less Girth than before I pumped anything BUT aesthetically things look a lot better so I figure its an OK trade-off and I\'m pretty sure I\'d gain that 0.25\" back as I let things fully rest.

Dance With Dragons wrote: I\'ve never pumped, hadn\'t even heard of it until after I got PMMA so I assumed it was a non option for me as I\'d read it can wreck your results.

Does pumping really boost your size temporarily?
I wear a Cock ring already so I don\'t mind that if I need to.

Does it make your glans bigger, again temporary is fine.

Length?

I know, lots of questions, but you guys will know better than anyone, and googling a topic like this is worthless. Thanks, and thanks sizemic for retrying your pumping experiment.

Yes it boosts size a fair amount temporarily... don\'t get carried away because its easy to with pumping as more time pumped = more size (swelling), unless you are limited by the cylinder width.

I find it might slightly puff up the glans, not noticeably though. Much less than the shaft and it doesn\'t hold fluid so to speak.

I wouldn\'t say it adds length, but it does stretch things out a bit. While in the tube you\'ll reach longer lengths because of the suction.

Wow, a .25\" decrease? That\'s pretty significant