TOPIC: Has anyone gained in length with manual PE (AFTER) getting PMMA injections?

So I’ve been doing length work but I’m getting a my and want to make my Girth bigger now. I still want to continue to do manual PE after I get the PMMA injections to increase length. I wanted to know has anyone here increased length after getting PMMA. And I’m talking real gains, not just pressing the ruler down harder to get an extra .25 inches lol. Thanks.

I have , and its documented.
I also do not use the "bone pressed" measurements. I do track that number from time to time as a data point though, but i don't use the number in my own goal seeking tracking.

You short answer is , YES, there is the ability to gain length after a procedure. There is no science as to whether it would or would not have been easier to make any gains before having received a filler, so not point in discussing it. There is theory to support both sides.

If you planning to get serious with your PE work, then map out a plan and stick to it or it will not work. Its like losing weight or gaining muscle or building a six pack, it wont happen quickly . And track everything, pictures, measurements from all ways and angles.

Texas wrote: I have , and its documented.
I also do not use the "bone pressed" measurements. I do track that number from time to time as a data point though, but i don't use the number in my own goal seeking tracking.

You short answer is , YES, there is the ability to gain length after a procedure. There is no science as to whether it would or would not have been easier to make any gains before having received a filler, so not point in discussing it. There is theory to support both sides.

If you planning to get serious with your PE work, then map out a plan and stick to it or it will not work. Its like losing weight or gaining muscle or building a six pack, it wont happen quickly . And track everything, pictures, measurements from all ways and angles.

What Hanger have you found is best? I’d tried the phallosan forte but it wouldn’t stay in place or be concealed enough for me to wear it at work. The noose Hanger isn’t bad, just wonder if there’s anything like it but better.

Texas wrote: I have , and its documented.
I also do not use the "bone pressed" measurements. I do track that number from time to time as a data point though, but i don't use the number in my own goal seeking tracking.

You short answer is , YES, there is the ability to gain length after a procedure. There is no science as to whether it would or would not have been easier to make any gains before having received a filler, so not point in discussing it. There is theory to support both sides.

If you planning to get serious with your PE work, then map out a plan and stick to it or it will not work. Its like losing weight or gaining muscle or building a six pack, it wont happen quickly . And track everything, pictures, measurements from all ways and angles.

Thanks man. I’m familiar with putting in the work. I gained a Inch back in 2013 which is in my sig. I documented everything including photos. A lot of it got deleted by the web owners unfortunately. SkepticalOne can back me up on that. What method did you use for lengthening? I just want to make sure not to mess up the filler. And did the exercises pull any filler from your base? That’s a concern of mine as well. How much Erect length did you gain after the procedure? Also how long did it take? Thanks.

New1inch wrote:

Texas wrote: I have , and its documented.
I also do not use the "bone pressed" measurements. I do track that number from time to time as a data point though, but i don't use the number in my own goal seeking tracking.

You short answer is , YES, there is the ability to gain length after a procedure. There is no science as to whether it would or would not have been easier to make any gains before having received a filler, so not point in discussing it. There is theory to support both sides.

If you planning to get serious with your PE work, then map out a plan and stick to it or it will not work. Its like losing weight or gaining muscle or building a six pack, it wont happen quickly . And track everything, pictures, measurements from all ways and angles.

Thanks man. I’m familiar with putting in the work. I gained a Inch back in 2013 which is in my sig. I documented everything including photos. A lot of it got deleted by the web owners unfortunately. SkepticalOne can back me up on that. What method did you use for lengthening? I just want to make sure not to mess up the filler. And did the exercises pull any filler from your base? That’s a concern of mine as well. How much Erect length did you gain after the procedure? Also how long did it take? Thanks.

Hey man, I wouldn't worry so much about stretching after a GE precedure. If you're using a microspheare based produce -- PMMA, Ellanse, etc -- it initates the creation of new living tissue, so it becomes less like a foreign product and more like a part of you. I also believe that this new tissue can be streched ... however, I don't have the data to back this up.

That said, I personally wouldn't recommend regularly Jelqing after a GE procedure. However, I'm in the camp that doesn't recommend Jelqing at all anytime.

cushen79 wrote:

Texas wrote: I have , and its documented.
I also do not use the "bone pressed" measurements. I do track that number from time to time as a data point though, but i don't use the number in my own goal seeking tracking.

You short answer is , YES, there is the ability to gain length after a procedure. There is no science as to whether it would or would not have been easier to make any gains before having received a filler, so not point in discussing it. There is theory to support both sides.

If you planning to get serious with your PE work, then map out a plan and stick to it or it will not work. Its like losing weight or gaining muscle or building a six pack, it wont happen quickly . And track everything, pictures, measurements from all ways and angles.

What hanger have you found is best? I’d tried the phallosan forte but it wouldn’t stay in place or be concealed enough for me to wear it at work. The noose hanger isn’t bad, just wonder if there’s anything like it but better.

@cushen79
I hated the phallosan personally.
I have different hangers and stretchers depending on what i am doing. For hangers, I prefer compression / clamp styles. Like the Phanger, Bib, Male Hanger, etc.

For stretchers, I use multiple different things depending on where I am going, what I am doing and what I am wearing. Shoot me a message if you want to talk more about what you do and wear etc.
But, suffice it to say, based on how tight your pants are will depend on what you can get away with, sleeves may be your best bet when working. Or, my personal favorite, wearing weights on my penis.

@Texas what devices do you use for pumping and hanging?

New1inch wrote:
Thanks man. I’m familiar with putting in the work. I gained a inch back in 2013 which is in my sig. I documented everything including photos. A lot of it got deleted by the web owners unfortunately. SkepticalOne can back me up on that. What method did you use for lengthening? I just want to make sure not to mess up the filler. And did the exercises pull any filler from your base? That’s a concern of mine as well. How much erect length did you gain after the procedure? Also how long did it take? Thanks.

@New1inch I have literally used about every method possible and have had NO problems at all. I have literally tried to damage the product, extreme times ( marathon hanging and marathon pumping ), High Pressure pumping. Moderately high weight hanging: both in a clamp/compression hanger and a vacuum. I could not damage it.
I did this knowing that I would be going back for another round. Nothing ever happened to the look of my penis.

My favorite exercises for length are hanging and pumping for length. I have worked up to doing these both each day at an average of an hour each per day. obviously that is not where I started out though, I had to work up to that. making small gains along the way.

As far as pulling filler away from the base - no. BUT, as you pull penis, and it grows, everything that you are pulling must pull from somewhere and stretch, so it is very possible that you should and could end what you consider a gap at the base. however, no one will see it. I have a bit of one right now, and you would never know. because as you pull, the base thickens.
So, I would not worry so much about doing PE.

wait_what wrote: @Texas what devices do you use for pumping and hanging?

@wait_what Man, I use a lot different stuff for hanging. but my baseline is a compression hanger.
for pumping i use a LeLuv cylinder.

I’m going to order a pump maybe I’ll try the one that you have. What kind of Girth gains are typical while pumping? I see they sell different sized tubes so I need to think about what size it’s going to pump to.

I also recommend small weights for when you're out in public, working, etc. It's comfortable, doesn't do much damage if worn for a long time, and you can feel the stretch.

I just use two of the metal steel Balls (like the one that Avanti Derma will give you) stacked on top of each other (I took off the ball from one and added it to another). I suppose I could add a third ball but this would increase the chances of it slipping off. It's kind of odd to have a couple of steel Balls fall out your pant leg. But I've only had this happen twice, so is not something I worry about too much.

As for creating a gap at the base -- good! Just go back and get more filler added to even it out.

Jacks10 wrote: I also recommend small weights for when you're out in public, working, etc. It's comfortable, doesn't do much damage if worn for a long time, and you can feel the stretch.

I just use two of the metal steel balls (like the one that Avanti Derma will give you) stacked on top of each other (I took off the ball from one and added it to another). I suppose I could add a third ball but this would increase the chances of it slipping off. It's kind of odd to have a couple of steel balls fall out your pant leg. But I've only had this happen twice, so is not something I worry about too much.

As for creating a gap at the base -- good! Just go back and get more filler added to even it out.

@Jacks10
i agree 100%. haha. I want an excuse to go back. haha.

agreed, wearing weights is different feeling and the stretch feel different for sure. I wear mine directly on my shaft though. sometimes. around the house I will wear a noose and dangle some as well for a little different feeling .

wait_what wrote: I’m going to order a pump maybe I’ll try the one that you have. What kind of Girth gains are typical while pumping? I see they sell different sized tubes so I need to think about what size it’s going to pump to.

This may need to go into a new tread, more about deciding cylinder size.
1st things 1st. the size is dependent on your goals. I do not pump for Girth at all. And based on the typical method of cylinder size selection from other boards (which is fine) I technically use a cylinder that is to small for my current and actual Girth, but that it why it work for length.

Heres a small side note for pumping. pumping works great for Girth, but for length it is difficult as a stand alone. it would be good to mix it with another type of PE

You think it’s typical to see 1/2 Inch Girth gains post pump?

Hey thanks. If I get PMMA I won’t be Jelqing at all. I will only do length work so it will be stretching and Hanging.